Intelligent Structures, Inc.

Home and Office Automation Specialists

Home Mission / Profile Benefits What Is an Automation System?
In Depth Wiring Tips News Partners Contact

Back to Automation In Depth

AMX Hubboxes

Stereo Audio Switchers (AS8/AS16)

Stereo Audio Switchers (AS8/AS16)

Available in 16 X 16 and 8 X 8 stereo configurations, PHAST audio switchers distribute stereo program and monaural intercom audio for whole-house sound integration. Operating via the PHASTLink data bus, Landmark audio switchers respond to keypads, panels, or system automation, and provide automated control of routing, level, tone, mute, loudness, bass, treble, and balance. Any input can be routed to any output. Housed in an elegant black enclosure that matches other Landmark large-chassis products, Landmark audio switchers can be rack or shelf mounted. These audio switchers have full pre-amp controls for each output. Intercom inputs can be configured as mono to save room on the router. The router employs signal sensing to determine if an input is active. This signal sensing capability can also be used to trigger events.

8-Channel Audio Amplifier (AMP8)

Built to meet exacting audio requirements, the PHAST 8-Channel Audio Amplifier provides multichannel amplifcation for whole-house distribution. Providing 4 stereo outputs with 60 watts RMS of amplification per channel, the amplifier operates via the PHASTLink data bus to activate level adjustments, audio mute, and system presets. Housed in an elegant black enclosure, the unit is designed for rack or shelf mounting. The gain for each channel can be controlled from a variety of points, including PHASTLink devices (PHAST keypads, AMX touchpanels), push-button controls at the back of the amplifier, and via a PC, using the amplifier's properties page in the PHAST Landmark software. The channel levels (0-99) are displayed at the back of the amplifier. Saves master gain levels in memory to balance outputs or limit gain.

Hub Box (HUB)

Hub Box (HUB)

The PHAST Landmark Hub Box works like a computer network hub, distributing the PHASTLink data bus from the Cardframe to multiple ports for large-scale, whole-house wiring. The Hub Box accepts up to three modular, plug-in hub cards; one type of hub card handles up to 15 ports, another runs eight ports and receives intercom audio from PHAST wall panels. Housed in an elegant black enclosure that matches other Landmark large-chassis products, Landmark Hub Boxes can be rack or shelf mounted. The Hub Box can be configured with one or two power supplies. Each power supply can power up to 32 keypads.

Hub Card (RPT)

Hub Card (RPT)

The PHAST Landmark Hub Card supports up to 15 PHASTLink wiring runs, each running up to 1000 feet of Category 5 cable and driving up to 10 devices per port. It links to the Landmark Cardframe or other hub boxes via Hub In and Hub Out ports.

Microphone Hub Card (MIC)

Microphone Hub Card (MIC)

The PHAST Landmark Microphone Hub Card supports up to eight PHASTLink wiring runs, each running up to 1000 feet of Category 5 cable and driving up to 10 devices per port. It links to the Landmark Cardframe or other hub boxes via Hub In and Hub Out ports. The card receives balanced-line audio from Landmark DMS and IMS keypads, using one keypad per PHASTLink port. It transmits line-level audio to Landmark AS8 and AS16 audio switchers for distribution to audio zones.

Video Switch (VS8)

Video Switch (VS8)

The PHAST VS8 Video Switch is the perfect partner to PHAST Landmark™ Audio Switches. The VS8 routes 8 video inputs to 8 video ouputs. It can distribute any input to any combination of outputs, with full signal level for all destinations. The VS8 senses the presence of a video signal at each input, allowing a video signal to act as a trigger event for system programming events. The Landmark Hub Box can house a combination of up to three Landmark large-chassis devices, including up to three VS8 Video Switches. This allows a single Landmark Hub Box to function as an 8 x 8, 16 x 16, or 24 x 24 matrix video router.

Touchpad Wiring Interface (TPW)

Touchpad Wiring Interface (TPW)

The PHAST TPW Touchpad Wiring Interface Board provides a PHASTLink interface to PHAST NT (formerly AudioEase) TP-series touchpads, allowing them to be used seamlessly as integral Landmark system devices. Each TPW board has connectors for up to eight TP-series touchpads, including TP-A, TP-B, and TP-C Touchpads. TPW firmware supports the PHAST NT touchpad protocol, including buttons, LEDs, numeric displays, and PHAST NT IR remote control functions. Up to three TPW boards can be installed in a PHAST Hub Box.

Hub Slot Blank Panel (BLANK)

The BLANK is used to fill any unused slot in the Hub Box.

I.S.I. is proud to be the area's only AMX Dealer

AMX Take Control